Boeing 777

Boeing 777
Boeing 777-200 of United Airlines, the 777's launch customer
Role Wide-body jet airliner
National origin United States
Manufacturer Boeing Commercial Airplanes
First flight June 12, 1994
Introduction June 7, 1995 with United Airlines
Status In production, in service
Primary users Emirates
United Airlines
Singapore Airlines
Air France
Produced 1993–present
Number built 977 as of November 2011[1]
Unit cost 777-200ER: US$244.7 million[2]
777-200LR: US$275.8 million[2]
777-300ER: US$298.3 million[2]
777F: US$280.1 million[2]

The Boeing 777 is a long-range, wide-body twin-engine jet airliner manufactured by Boeing Commercial Airplanes. It is the world's largest twinjet and is commonly referred to as the "Triple Seven".[3][4] The aircraft has seating for over 300 passengers and has a range from 5,235 to 9,380 nautical miles (9,695 to 17,370 km), depending on model. Its distinguishing features include the largest-diameter turbofan engines of any aircraft, six wheels on each main landing gear, a circular fuselage cross-section, and blade-shaped tail cone.[5] Developed in consultation with eight major airlines, the 777 was designed to replace older wide-body airliners and bridge the capacity difference between the 767 and 747. As Boeing's first fly-by-wire airliner, it has computer mediated controls; it is also the first entirely computer-designed commercial aircraft.

The 777 is produced in two fuselage lengths. The original 777-200 model first entered service in 1995, followed by the extended-range 777-200ER in 1997; the stretched 777-300, which is 33.3 ft (10.1 m) longer, began service in 1998. The longer-range 777-300ER and 777-200LR variants entered service in 2004 and 2006, respectively, while a freighter version, the 777F, debuted in 2009. Both longer-range versions and the freighter feature General Electric GE90 engines, as well as extended and raked wingtips. Other models are equipped with either the GE90, Pratt & Whitney PW4000, or Rolls-Royce Trent 800 engines. The 777-200LR is the world's longest-range airliner and holds the record for longest distance flown by a non-stop commercial aircraft,[6][7] with the demonstrated capability to fly more than halfway around the world.

United Airlines first placed the 777 into commercial airline service in 1995. As of July 2011, 60 customers have placed orders for 1,242 aircraft of all variants, with 949 delivered.[1] The most common variant used worldwide is the 777-200ER, with 415 aircraft delivered, and Emirates operates the largest 777 fleet, with 87 aircraft as of August 2011.[8] The airliner has recorded two hull-loss accidents, with no occupant fatalities, as of December 2011.

Through the 2000s, the 777 has emerged as one of its manufacturer's best-selling models. Because of rising fuel costs, airlines have acquired the type as a comparatively fuel-efficient alternative to other wide-body jets and have increasingly used the aircraft on long-haul, transoceanic routes. Direct market competitors include the Airbus A330-300, A340, and the upcoming A350. The subsequently developed 787 Dreamliner also shares design features with the 777.

Development

Background

In the early 1970s, the Boeing 747, McDonnell Douglas DC-10, and the Lockheed L-1011 TriStar became the first generation of wide-body passenger airliners to enter service.[9] In 1978, Boeing unveiled three new models: the twin-engine 757 to replace the venerable 727, the twin-engine 767 to challenge the Airbus A300, and a trijet 777 concept to compete with the DC-10 and L-1011.[10][11] The mid-size 757 and 767 launched to market success, due in part to 1980s extended-range twin-engine operational performance standards (ETOPS) regulations governing transoceanic twinjet operations.[12] These regulations allowed twin-engine airliners to make ocean crossings at up to three hours' distance from emergency diversionary airports.[13] Under ETOPS rules, airlines began operating the 767 on long-distance overseas routes that did not require the capacity of larger airliners.[12] The trijet 777 was later dropped, following marketing studies that favored the 757 and 767 variants.[14] Boeing was left with a size and range gap in its product line between the 767-300ER and the 747-400.[15]

By the late 1980s, DC-10 and L-1011 models were approaching retirement, prompting manufacturers to develop replacement designs.[16] McDonnell Douglas was working on the MD-11, a stretched and upgraded version of the DC-10,[16] while Airbus was developing the A330 and A340.[16] In 1986, Boeing unveiled proposals for an enlarged 767, tentatively named 767-X,[17] to target the replacement market for first-generation wide-bodies like the DC-10,[13] and to complement existing 767 and 747 models in the company lineup.[18] The initial proposal featured a longer fuselage and larger wings than the existing 767,[17] along with winglets.[19] Later plans expanded the fuselage cross-section but retained the existing 767 flight deck, nose, and other elements.[17]

Airline customers were unimpressed with the 767-X proposals, and instead wanted an even wider fuselage cross-section, fully flexible interior configurations, short- to intercontinental-range capability, and an operating cost lower than any 767 stretch.[13] Airline planners' requirements for larger aircraft had become increasingly specific, adding to the heightened competition among aircraft manufacturers.[16] By 1988, Boeing realized that the only answer was a new design, which would become the 777 twinjet.[20] The company opted for the twin-engine configuration given past design successes, projected engine developments, and reduced-cost benefits.[21] On December 8, 1989, Boeing began issuing offers to airlines for the 777.[17]

Design effort

The design phase for Boeing's new twinjet was different from the company's previous commercial jetliners. For the first time, eight major airlines – All Nippon Airways, American Airlines, British Airways, Cathay Pacific Airways, Delta Air Lines, Japan Airlines, Qantas, and United Airlines – had a role in the development of the airliner.[22] This was a departure from industry practice, where manufacturers typically designed aircraft with minimal customer input.[11] The eight airlines that contributed to the design process became known within Boeing as the "Working Together" group.[22] At the first group meeting in January 1990, a 23-page questionnaire was distributed to the airlines, asking each what it wanted in the new design.[13] By March 1990, Boeing and the airlines had decided upon a basic design configuration: a cabin cross-section close to the 747's, capacity up to 325 passengers, flexible interiors, a glass cockpit, fly-by-wire controls, and 10 percent better seat-mile costs than the A330 and MD-11.[13] Boeing also selected its Everett factory in Washington, home of 747 production, as the final assembly site for the 777.[23]

On October 14, 1990, United Airlines became the 777's launch customer when it placed an order for 34 Pratt & Whitney-powered aircraft valued at US$11 billion with options on an additional 34.[24][25] The development phase coincided with United's replacement program for its aging DC-10s.[26] United required that the new aircraft be capable of flying three different routes: Chicago to Hawaii, Chicago to Europe, and non-stop from Denver, a hot and high airport, to Hawaii.[26] ETOPS certification was also a priority for United,[27] given the overwater portion of United's Hawaii routes.[24] In January 1993, a team of United developers joined other airline teams and Boeing designers at the Everett factory.[28] The 240 design teams, with up to 40 members each, addressed almost 1,500 design issues with individual aircraft components.[29] The fuselage diameter was increased to suit Cathay Pacific, the baseline model grew longer for All Nippon Airways, and British Airways' input led to added built-in testing and interior flexibility,[13] along with higher operating weight options for the basic aircraft.[30]

The 777 was the first commercial aircraft to be designed entirely on computer.[18][24] Each design drawing was created on a three-dimensional CAD software system known as CATIA, sourced from Dassault Systemes and IBM.[31] This allowed a virtual aircraft to be assembled, in simulation, to check for interferences and to verify proper fit of the many thousands of parts, thus reducing costly rework.[32] Boeing developed their own high-performance visualization system, FlyThru, later called IVT (Integrated Visualization Tool) to support large-scale collaborative engineering design reviews, production illustrations, and other uses of the CAD data outside of engineering.[33] Boeing was initially not convinced of CATIA's abilities and built a physical mock-up of the nose section to verify its results. The test was so successful that additional mock-ups were canceled.[34]

Production and testing

The production process included substantial international content, with an unprecedented level of global subcontracting for a Boeing jetliner,[35] exceeded only by the later 787.[36] International contributors included Mitsubishi Heavy Industries and Kawasaki Heavy Industries (fuselage panels),[37] Fuji Heavy Industries, Ltd. (center wing section),[37] Hawker de Havilland (elevators), and Aerospace Technologies of Australia (rudder).[38] An agreement between Boeing and the Japan Aircraft Development Corporation, representing Japanese aerospace contractors, made the latter risk-sharing partners for 20 percent of the entire development program.[35] The initial 777-200 model was launched with propulsion options from three manufacturers, General Electric, Pratt & Whitney, and Rolls-Royce,[39] giving the airlines their choice of engines from competing firms.[40] Each manufacturer had agreed to develop an engine in the 77,000 lbf (340 kN) and higher thrust class (a measure of jet engine output) to power the world's largest twinjet.[39]

To accommodate production of its new airliner, Boeing doubled the size of the Everett factory at the cost of nearly US$1.5 billion[24] to provide space for two new assembly lines.[26] New production methodologies were developed, including a turn machine that could rotate fuselage subassemblies 180 degrees, giving workers access to upper body sections.[31] Major assembly of the first aircraft began on January 4, 1993.[41] By the start of production, the program had amassed 118 firm orders, with options for 95 more from 10 airlines.[42] Total investment in the program was estimated at over US$4 billion from Boeing, with an additional US$2 billion from suppliers.[43]

On April 9, 1994, the first 777, line number WA001, was rolled out in a series of 15 ceremonies held during the day to accommodate the 100,000 invited guests.[44] The first flight took place on June 12, 1994,[45] under the command of chief test pilot John E. Cashman.[46] This marked the start of an 11-month flight test program that was intended to be more extensive than that of any previous Boeing model.[47] Nine aircraft fitted with General Electric, Pratt & Whitney, and Rolls-Royce engines[45] were flight tested at locations ranging from the desert airfield at Edwards Air Force Base in California[48] to frigid conditions in Alaska, mainly Fairbanks' FAI.[49] To satisfy ETOPS requirements, eight 180-minute single-engine test flights were performed.[50] The first aircraft built was used by Boeing's nondestructive testing campaign from 1994 to 1996, and provided data for the −200ER and −300 programs.[51] At the successful conclusion of flight testing, the 777 was awarded simultaneous airworthiness certification by the Federal Aviation Administration (FAA) and Joint Aviation Authorities (JAA) on April 19, 1995.[45]

Entry into service

Boeing delivered the first 777 to United Airlines on May 15, 1995.[52][53] The FAA awarded 180-minute ETOPS clearance ("ETOPS-180") for the Pratt & Whitney PW4084-engined aircraft on May 30, 1995, making it the first airliner to carry an ETOPS-180 rating at its entry into service.[54][55] Longer ETOPS clearance of 207 minutes was approved the following October.[56] The first commercial flight took place on June 7, 1995 from London Heathrow Airport to Dulles International Airport near Washington, D.C.[57]

On November 12, 1995, Boeing delivered the first model with General Electric GE90-77B engines to British Airways,[58] which placed the aircraft into service five days later.[59] Initial service was affected by gearbox bearing wear issues, which caused the airline to temporarily withdraw its 777 fleet from transatlantic service in 1997.[59] British Airways' aircraft returned to full service later that year,[48] and General Electric subsequently announced engine upgrades.[48]

The first Rolls-Royce Trent 877-powered aircraft was delivered to Thai Airways International on March 31, 1996,[58] completing the introduction of the three powerplants initially developed for the airliner.[60] Each engine-aircraft combination had secured ETOPS-180 certification from the point of entry into service.[61] By June 1997, orders for the 777 numbered 323 from 25 airlines, including satisfied launch customers that had ordered additional aircraft.[45] Operations performance data established the consistent capabilities of the twinjet over long-haul transoceanic routes, leading to additional sales.[62] By 1998, dispatch reliability figures had reached a 99.96 percent rate of takeoff without delay due to technical issues,[63] and the growing number of fleet hours approached 900,000.[63]

Initial derivatives

After the original model, Boeing developed the 777-200ER, an increased gross weight variant with greater range and payload capability.[64] The −200ER first flew on October 7, 1996,[65] received FAA and JAA certification on January 17, 1997,[66] and entered service with British Airways on February 9, 1997.[66] Offering greater long-haul performance, the variant became the most widely ordered version of the aircraft through the early 2000s.[64] On April 2, 1997, a Malaysia Airlines −200ER named "Super Ranger" broke the great circle "distance without landing" record for an airliner by flying eastward from Boeing Field, Seattle to Kuala Lumpur, a distance of 10,823 nautical miles (20,044 km), in 21 hours and 23 minutes.[63]

Following the introduction of the −200ER, Boeing turned its attention to a stretched version of the airliner. On October 16, 1997, the 777-300 made its first flight.[65] At 242.4 ft (73.9 m) in length, the −300 became the longest airliner yet produced (until the A340-600), and had a 20 percent greater overall capacity than the standard length model.[67] The −300 was awarded type certification simultaneously from the FAA and JAA on May 4, 1998,[68] and entered service with launch customer Cathay Pacific on May 27, 1998.[65][69]

From the start of the development program, Boeing had considered building ultra-long-range variants.[70] Early plans centered on a 777-100X proposal,[71] which would have been a shortened version of the −200 with reduced weight and increased range,[71] similar to the 747SP.[72] However, the −100X would have carried fewer passengers than the −200 while having similar operating costs, leading to a higher cost per seat.[71][72] By the late 1990s, design plans shifted to longer-range versions of existing models.[71] A more-powerful engine in the 100,000 lbf (440 kN) and higher thrust class was required, leading to active discussions between Boeing and the engine manufacturers. General Electric offered to develop the GE90-115B engine,[40] while Rolls-Royce proposed developing the Trent 8104 engine.[73] In 1999, Boeing announced an agreement with General Electric, beating out rival proposals.[40] As part of the deal with General Electric, Boeing agreed that GE90 engines would be the only powerplants offered for new versions of the 777.[40]

Longer-range models

On February 29, 2000, Boeing launched its next-generation twinjet program,[75] initially called 777-X,[70] and began issuing offers to airlines.[64] Development of the long-range models was slowed by the airline industry downturn, which lasted through the early 2000s.[65] The first model to emerge from the program, the 777-300ER, was launched with an order for ten aircraft from Air France,[76] along with additional commitments.[64] On February 24, 2003, the −300ER made its first flight, and the FAA and EASA (European Aviation Safety Agency, successor to the JAA) certified the model on March 16, 2004.[77] The first delivery to Air France took place on April 29, 2004.[65] The −300ER, which combined the −300's added capacity with the −200ER's range, became the top-selling 777 variant in the late 2000s,[78] gaining orders as airlines replaced comparable four-engine models with twinjets because of their lower operating costs.[79]

The second model to originate from the next-generation program, the 777-200LR, rolled out on February 15, 2005, and completed its first flight on March 8, 2005.[65] The −200LR was certified by both the FAA and EASA on February 2, 2006,[80] and the first delivery to Pakistan International Airlines occurred on February 26, 2006.[81] On November 10, 2005, the first −200LR set a record for the longest non-stop flight of a passenger airliner by flying 11,664 nautical miles (21,602 km)[7] eastward from Hong Kong to London.[6] Lasting 22 hours and 42 minutes, the flight surpassed the −200LR's standard design range and was logged into the Guinness World Records.[6][82]

The next-generation freighter model, the 777F, rolled out on May 23, 2008.[83] The maiden flight of the 777F, which used the structural design and engine specifications of the −200LR[84] along with fuel tanks derived from the −300ER,[85] occurred on July 14, 2008.[86] FAA and EASA type certification for the freighter was received on February 6, 2009,[87] and the first delivery to launch customer Air France took place on February 19, 2009.[88][89]

Further developments

Initially second to the 747 as Boeing's most profitable jetliner,[90] the 777 has since become the company's most lucrative model.[91] In 2000, program sales accounted for an estimated US$400 million of Boeing's pretax earnings, US$50 million more than the 747.[90] By 2004, the airliner comprised the bulk of wide-body revenues for the Boeing Commercial Airplanes division.[92] In 2007, orders for next-generation 777 models approached 350 aircraft,[93] and in November of that year, Boeing announced that all production slots were sold out to 2012.[79] The program backlog of 356 orders was valued at US$95 billion at list prices in 2008.[94]

In the late 2000s, the 777 faced the possibility of increased competition from Airbus' planned A350 XWB and internally from proposed variants of the 787,[93] both airliners that promise fuel efficiency improvements. As a consequence, the 777-300ER received an engine and aerodynamics improvement package for reduced drag and weight.[95] In 2010, the variant further received a 5,000 lb (2,300 kg) maximum zero-fuel weight increase, equivalent to a higher payload of 20–25 passengers; its GE90-115B1 engines received a 1–2.5 percent thrust enhancement for increased takeoff weights at higher-altitude airports.[95] More design changes were targeted for late 2012, including possible extension of the wingspan,[95] and more major changes were being considered, including a composite wing, new powerplant, and different fuselage lengths.[95][96][97] Emirates has been reported as working closely with Boeing on the project, and may be the aircraft's launch customer.[98]

In September 2011, Boeing and General Electric released more details on the new 777 version. Wingspan is expected to increase from the current 212 ft 7 in (64.8 m) to 234 feet (71.3 m). In addition, gross weight is tentatively slated to decrease slightly from the current 775,000 lb (352,000 kg) to 753,000 lb (342,000 kg) for the −9X model. General Electric has announced studies on a slightly smaller engine, dubbed the GE9X, to power the proposed variant. It will feature a fan diameter decrease from the 135 in (343 cm) of the GE90-115B to 128 in (325 cm) and a thrust decrease of 15,500 lbf (69 kN) to a new rating of 99,500 lbf (443 kN) per engine.[99][100] Current estimates place entry into service around 2019.[101]

Boeing revealed plans to increase 777 production from 5 aircraft per month in 2010 to 7 aircraft per month by mid-2011, and 8.3 per month by early 2013.[102] Complete assembly of each 777-300ER requires 49 days.[103] Assembly of the 1,000th 777, a −300ER model for Emirates, began in November 2011.[103] In late 2011, the FAA assigned a common type rating to the 787 and 777, allowing pilots qualified on either aircraft to operate both models, due to related design features.[104] According to industry reports, the aircraft may eventually be replaced by a new product family, the Boeing Yellowstone 3, which would draw upon technologies from the 787.[93]

Design

Boeing introduced a number of advanced technologies with the 777 design, including fully digital fly-by-wire controls,[105] fully software-configurable avionics, Honeywell LCD glass cockpit flight displays,[106] and the first use of a fiber optic avionics network on a commercial airliner.[107] Boeing made use of work done on the cancelled Boeing 7J7 regional jet,[108] which utilized similar versions of the chosen technologies.[108] In 2003, Boeing began offering the option of cockpit electronic flight bag computer displays.[109]

Fly-by-wire

In designing the 777 as its first fly-by-wire commercial aircraft, Boeing decided to retain conventional control yokes[105] rather than change to sidestick controllers as used in many fly-by-wire fighter aircraft and in many Airbus airliners.[105] Along with traditional yoke and rudder controls, the cockpit features a simplified layout that retains similarities to previous Boeing models.[110] The fly-by-wire system also incorporates flight envelope protection,[105] a system that guides pilot inputs within a computer-calculated framework of operating parameters, acting to prevent stalls and overly stressful maneuvers.[105] This system can be overridden by the pilot in command if deemed necessary.[105]

Airframe and systems

The 777's wings feature a supercritical airfoil design that is swept back at 31.6 degrees and optimized for cruising at Mach 0.83 (revised upward after flight tests to Mach 0.84).[111] The wings are designed with increased thickness and a longer span than previous airliners, resulting in greater payload and range, improved takeoff performance, and a higher cruising altitude.[45] Folding wingtips were offered when the aircraft was launched, to appeal to airlines who might use gates made to accommodate smaller aircraft, but no airline purchased this option.[112]

The airframe incorporates the use of composite materials, which comprise nine percent of its original structural weight.[113] Elements made from composite material include the cabin floor and rudder. The main fuselage cross-section is circular[114] and tapers rearward into a blade-shaped tail cone with a port-facing auxiliary power unit.[5] The aircraft also features the largest landing gear and the biggest tires ever used in a commercial jetliner.[115] Each tire of a 777-300ER six-wheel main landing gear can carry a load of 59,490 lb (26,980 kg), heavier than other wide-bodies such as the 747-400.[116] The aircraft has triple redundant hydraulic systems with only one system required for landing.[117] A ram air turbine –a small retractable propeller which can provide emergency power– is also fitted in the wing root fairing.[118]

Interior

The 777 interior, also known as the Boeing Signature Interior, features curved panels, larger overhead bins, and indirect lighting.[59] Seating options range from six abreast in first class up to 10 across in economy.[119] At 15-inch (380 mm) by 10-inch (250 mm), the windows were the largest of any current commercial airliner until the 787.[120] The cabin also features "Flexibility Zones", which entails deliberate placement of water, electrical, pneumatic, and other hook-ups throughout the interior space, allowing airlines to move seats, galleys, and lavatories quickly when adjusting cabin arrangements.[119] Several aircraft have also been fitted with VIP interiors for non-airline use.[121] Boeing engineers designed a new hydraulically damped toilet seat cover hinge that closes slowly.[122]

In 2003, Boeing introduced overhead crew rests as an option on the 777.[123] Located above the main cabin and connected via staircases, the forward flight crew rest contains two seats and two bunks, while the aft cabin crew rest features multiple bunks.[123] The Signature Interior has since been adapted for other Boeing wide-body and narrow-body aircraft, including 737NG, 747-400, 757-300, and newer 767 models, including all 767-400ER models.[124][125] The 747–8 and 767-400ER have also adopted the larger, more rounded windows of the 777.

On July 7, 2011, it was reported that Boeing is considering to replace the Signature Interior on the 777 with a new interior similar to that on the 787, as part of a move towards a 'common cabin experience' across all Boeing platforms.[126]

Variants

Boeing 777 variants
ICAO code[127] Model(s)
B772 777-200/200ER
B77L 777-200LR/777F
B773 777-300
B77W 777-300ER

Boeing uses two characteristics, fuselage length and range, to define their 777 models.[15] Fuselage length affects the number of passengers and amount of cargo that can be carried; the 777-200 and derivatives are the base size, and the aircraft was stretched into the 777-300 in 1998. In terms of range, the aircraft has been categorized into three segments based on design criteria; these were initially defined as the following:

When referring to different variants, Boeing and airlines often collapse the model number (777) and the variant designator (−200 or −300) into a truncated form (e.g. "772" or "773"[130]). The International Civil Aviation Organization (ICAO) aircraft type designator system adds a preceding manufacturer letter (e.g. "B772" or "B773").[127] Subsequent to the capacity number, designations may or may not append the range identifier (e.g. 777-300ER as "773ER",[131] "773B",[132] "77W",[133] or "B77W"[127]). These notations may be found in aircraft manuals or airline timetables.

777-200

The 777-200 was the initial A-market model. The first −200 was delivered to United Airlines on May 15, 1995.[65] With a maximum range of 5,235 nautical miles (9,695 km),[134] the −200 was chiefly aimed at U.S. domestic airline operators.[15] Nine different −200 customers have taken delivery of 88 aircraft,[1] with 68 in airline service as of July 2011.[8] The competing aircraft from Airbus is the A330-300.[135]

777-200ER

The 777-200ER ("ER" for Extended Range), the B-market version of the −200, was originally known as the 777-200IGW for its increased gross weight.[136] The −200ER features additional fuel capacity and an increased maximum takeoff weight (MTOW) over the −200.[134] Aimed at international airlines operating transatlantic routes,[15] the −200ER's maximum range is 7,700 nautical miles (14,300 km).[134] In addition to breaking the eastbound great circle "distance without landing" record, the −200ER also holds the record for the longest ETOPS-related emergency flight diversion (177 minutes under one engine), on a United Airlines flight carrying 255 passengers on March 17, 2003, over the Pacific Ocean.[137][138]

The first −200ER was delivered to British Airways on February 6, 1997.[65] As of July 2011, −200ER deliveries to 33 different customers numbered 415,[1] ranking the −200ER as the most widely produced variant of the twinjet to date.[64] As of July 2011, 428 of the variant were in airline service.[8] The competing aircraft from Airbus is the A340-300.[139]

777-300

The stretched 777-300 was designed as an A-market replacement for 747-100s and 747-200s.[140] Compared to the older 747s, the stretched 777 has comparable passenger capacity and range, and is designed to burn one-third less fuel and have 40 percent lower maintenance costs.[67] The −300 features a 33.3 ft (10.1 m) fuselage stretch over the baseline −200, allowing seating for up to 550 passengers in a single class high-density configuration,[67] an arrangement adopted for heavily trafficked Japanese routes.[141] Because of the aircraft's length, the −300 is equipped with a tailskid and ground maneuvering cameras to aid pilots during taxi.[142] The maximum range is 6,015 nautical miles (11,140 km),[143] allowing the −300 to operate trunk routes previously flown by older 747s.[67]

The first −300 was delivered to Cathay Pacific on May 21, 1998.[65][69] Eight different −300 customers have taken delivery of 60 aircraft,[1] and all were in airline service as of July 2011.[8] However, following the introduction of the longer-range −300ER in 2004, all operators have selected the ER version of the −300 model.[1] The −300 has no direct Airbus rival, but the A340-600 is offered in competition.[144][145]

777-200LR

The 777-200LR ("LR" for Longer Range), the C-market model, became the world's longest-range commercial airliner when it entered service in 2006.[146][147] Boeing named this aircraft the Worldliner, highlighting its ability to connect almost any two airports in the world,[148] although it is still subject to ETOPS restrictions.[149] It holds the world record for the longest nonstop flight by a commercial airliner,[7] and has a maximum range of 9,380 nautical miles (17,370 km).[82] The −200LR was intended for ultra-long-haul routes such as Los Angeles to Singapore.[70]

Developed alongside the −300ER, the −200LR features an increased MTOW and three optional auxiliary fuel tanks in the rear cargo hold.[146] Other new features include raked wingtips, redesigned main landing gear, and additional structural strengthening.[146] As with the −300ER and 777F, the −200LR is equipped with wingtip extensions of 12.8 ft (3.90 m).[146] The -200LR is powered by GE90-110B1 or GE90-115B turbofans.[85] The first −200LR was delivered to Pakistan International Airlines on February 26, 2006.[81][150] As of July 2011, nine different −200LR customers have taken delivery of 52 aircraft, with 3 unfilled orders.[1] Airlines operated 48 of the -200LR variant as of July 2011.[8] The closest competing aircraft from Airbus is the A340-500HGW.[146]

777-300ER

The 777-300ER ("ER" for Extended Range) is the B-market version of the −300. It features raked and extended wingtips, a new main landing gear, reinforced nose gear, and extra fuel tanks.[151][152] The −300ER also has a strengthened fuselage, wings, empennage, and engine attachments.[85] The standard GE90-115B turbofan is the world's most powerful jet engine in service, with a maximum thrust of 115,300 lbf (513 kN).[151] The maximum range is 7,930 nautical miles (14,690 km),[153] made possible due to a higher MTOW along with the increased fuel capacity.[144][145] The −300ER can fly approximately 34 percent further than the −300 with a full load of passengers and cargo.[85] Following flight testing, the implementation of engine, wing, and weight modifications produced an added 1.4 percent reduction in fuel consumption.[78][154]

The first −300ER was delivered to Air France on April 29, 2004.[65][155] The −300ER ranks as the best-selling 777 variant, having surpassed the −200ER in September 2010,[1] and since its launch the model has been a primary driver of the twinjet's sales past the rival A340.[93] Using only two engines produces a typical operating cost advantage of around 8–9 percent for the −300ER over the A340-600,[156] along with a 20 percent fuel burn advantage over the 747-400.[79] Several airlines have acquired the −300ER as a 747-400 replacement amid rising fuel prices.[79] As of July 2011, −300ER deliveries to 24 different customers totaled 290, with 224 unfilled orders.[1] Operators had 281 aircraft in service as of July 2011.[8] The −300ER's direct Airbus competitors are the A340-600HGW and the upcoming A350-1000.[93][145]

777 Freighter

The 777 Freighter (777F) is an all-cargo version of the twinjet, and shares features with the −200LR; these include its airframe, engines,[157] and fuel capacity.[85] With a maximum payload of 226,000 lb (103,000 kg),[85] cargo capacity is similar to the 243,000 lb (110,000 kg) of the 747-200F.[79] The freighter has a range of 4,900 nmi (9,070 km) at maximum payload,[85] although greater range is possible if less cargo weight is carried.[158] As the aircraft promises improved operating economics compared to existing freighters,[79] airlines have targeted the 777F as a replacement for older freighters including the 747-200F and MD-11F.[84][159]

The first 777F was delivered to Air France on February 19, 2009.[88] As of July 2011, 44 freighters had been delivered to eight different customers, with 52 unfilled orders.[1] Airlines had 39 of the 777F variant in operation as of July 2011.[8]

In the 2000s, Boeing began studying the conversion of 777-200ER and −200 passenger airliners into freighters, under the name 777 BCF (Boeing Converted Freighter).[160] The company has been in discussion with several airline customers, including FedEx Express, UPS Airlines, and GE Commercial Aviation Services, to provide launch orders for a 777 BCF program.[161]

777 Tanker (KC-777)

The KC-777 is a proposed tanker version of the 777. In September 2006, Boeing publicly announced that it would produce the KC-777, if the United States Air Force (USAF) requires a larger tanker than the KC-767. The 777 tanker would also be able to transport more cargo or personnel.[162][163][164] In April 2007, Boeing instead offered its KC-767 Advanced Tanker for USAF's KC-X competition.[165]

Operators

The customers that have received the most 777s are ILFC, Emirates, Singapore Airlines, United Airlines, and Air France. A total of 924 aircraft (all variants) were in airline service as of July 2011, with Emirates (87), Singapore Airlines (66), Air France (61), United Airlines (52), All Nippon Airways (49), British Airways (49), American Airlines (47), Japan Airlines (46), Cathay Pacific (38), Korean Air (29), Air India (24), and other operators with fewer aircraft of the type.[8]

Orders and deliveries

Orders Deliveries
Type Total Backlog Total 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995
777-200 88 88 1 3 2 1 3 9 3 10 11 32 13
777-200ER 428 13 415 0 3 4 3 19 23 13 22 29 41 55 42 63 50 48
777-200LR 55 1 54 6 9 16 11 10 2
777-300 60 60 1 4 2 9 6 3 4 17 14
777-300ER 603 295 308 47 40 52 47 53 39 20 10
777F 121 69 52 14 22 16
Total 1,357 380 977 67 74 88 61 83 65 40 36 39 47 61 55 83 74 59 32 13

Data through November 2011. Updated on December 8, 2011.[1][166][167]

Incidents and accidents

As of December 2011, the 777 has been in eight aviation occurrences,[169] including two hull-loss accidents,[170] and two hijackings, with no fatalities among the passengers or crew.[171] The only fatality involving the twinjet occurred in a refueling fire at Denver International Airport on September 5, 2001, during which a ground worker sustained fatal burns.[172] The aircraft, operated by British Airways, suffered fire damage to the lower wing panels and engine housing; it was later repaired and put back into service.[172][173]

The type's first hull loss occurred on January 17, 2008, when British Airways Flight 38 (BA38), a Rolls-Royce Trent 895 engined 777-200ER flying from Beijing to London, crash-landed approximately 1,000 feet (300 m) short of Heathrow Airport's runway 27L and slid onto the runway's threshold. There were 47 injuries and no fatalities. The impact damaged the landing gear, wing roots, and engines, and the aircraft was written off.[174][175] Upon investigation, the accident was blamed on ice crystals from the fuel system clogging the fuel-oil heat exchanger (FOHE).[168] Air accident investigators called for this component on the Trent 800 series engine to be redesigned, and manufacturer Rolls-Royce said the new part should be ready by about March 2010.[176] Redesigned fuel oil heat exchangers were installed in British Airways' 777s by October 2009.[177]

Two other minor momentary losses of thrust with Trent 895 engines occurred in February and November 2008.[178][179] The National Transportation Safety Board (NTSB) investigators concluded that, just as on BA38, the loss of power was caused by ice in the fuel clogging the fuel-oil heat exchanger. As a result, the heat exchanger was redesigned.[168]

The type's second hull-loss occurred on July 29, 2011, when an EgyptAir 777-200ER suffered a cockpit fire while parked at the gate at Cairo International Airport.[180] The plane was successfully evacuated with no injuries,[180] and airport fire teams extinguished the fire.[181] The aircraft sustained structural, heat, and smoke damage, and was written off.[180][181] Investigators focused on a possible electrical fault with a supply hose in the cockpit crew oxygen system.[180]

Specifications

777-200 777-200ER 777-200LR 777 Freighter 777-300 777-300ER
Cockpit crew Two
Seating capacity,
typical
301 (3-class)
400 (2-class)
440 (maximum)
N/A
(cargo)
365 (3-class)
451 (2-class)
550 (maximum)
Length 209 ft 1 in (63.7 m) 242 ft 4 in (73.9 m)
Wingspan 199 ft 11 in (60.9 m) 212 ft 7 in (64.8 m) 199 ft 11 in (60.9 m) 212 ft 7 in (64.8 m)
Wing sweepback 31.64°
Tail height 60 ft 9 in (18.5 m) 61 ft 1 in (18.6 m) 60 ft 8 in (18.5 m)
Cabin width 19 ft 3 in (5.87 m)
Fuselage width 20 ft 4 in (6.20 m)
Maximum cargo capacity 5,720 cu ft (162 m3)
32× LD3
23,051 cu ft (653 m3)
37× pallets
7,640 cu ft (216 m3)
44× LD3
Empty weight, operating 297,300 lb
(134,800 kg)
304,500 lb
(138,100 kg)
320,000 lb
(145,150 kg)
318,300 lb
(144,400 kg)
353,800 lb
(160,500 kg)
370,000 lb
(167,800 kg)
Maximum landing weight 445,000 lb
(201,840 kg)
470,000 lb
(213,180 kg)
492,000 lb
(223,168 kg)
575,000 lb
(260,816 kg)
524,000 lb
(237,680 kg)
554,000 lb
(251,290 kg)
Maximum Takeoff Weight
(MTOW)
545,000 lb
(247,200 kg)
656,000 lb
(297,550 kg)
766,000 lb
(347,500 kg)
766,800 lb
(347,800 kg)
660,000 lb
(299,370 kg)
775,000 lb
(351,500 kg)
Typical cruise speed Mach 0.84 (560 mph, 905 km/h, 490 knots) at a cruise altitude of 35,000 ft (11,000 m)
Maximum cruise speed Mach 0.89 (590 mph, 950 km/h, 512 knots) at a cruise altitude of 35,000 ft (11,000 m)
Maximum range 5,240 nmi
(9,700 km)
7,725 nmi
(14,310 km)
9,380 nmi
(17,370 km)
4,900 nmi
(9,070 km)
6,005 nmi
(11,120 km)
7,930 nmi
(14,690 km)
Takeoff distance at MTOW
ISA+15 MSL
8,300 ft
2,530 m
11,700 ft
3,570 m
9,750 ft
2,970 m
9,800 ft
2,990 m
11,100 ft
3,380 m
10,500 ft
3,200 m
Maximum fuel capacity 31,000 US gal
(117,348 L)
45,220 US gal
(171,176 L)
47,890 US gal
(181,283 L)
47,890 US gal
(181,283 L)
45,220 US gal
(171,176 L)
47,890 US gal
(181,283 L)
Service ceiling 43,100 ft (13,140 m)
Engine (×2) PW 4077
RR 877
GE90-77B
PW 4090
RR 895
GE90-94B
GE90-110B1
GE90-115B1
PW 4098
RR 892
GE90-92B/GE90-94B
GE90-115B1
Thrust (×2) PW: 77,000 lbf (342 kN)
RR: 76,000 lbf (338 kN)
GE: 77,000 lbf (342 kN)
PW: 90,000 lbf (400 kN)
RR: 93,400 lbf (415 kN)
GE: 93,700 lbf (417 kN)
GE −110B: 110,100 lbf (490 kN)
GE −115B: 115,540 lbf (514 kN)
PW: 98,000 lbf (436 kN)
RR: 93,400 lbf (415 kN)
GE: 92,000/93,700 lbf (409 kN)/(418 kN)
GE: 115,540 lbf (514 kN)

Sources: Boeing 777 specifications,[85] Boeing 777 airport planning report,[182] Civil Aircraft,[183] Rolls-Royce Trent 800 series data[184]

See also

Related development
Aircraft of comparable role, configuration and era

Related lists

References

Notes
  1. ^ a b c d e f g h i j k "777 Model Orders and Deliveries summary". Boeing. October 2011. http://active.boeing.com/commercial/orders/displaystandardreport.cfm?cboCurrentModel=777&optReportType=AllModels&cboAllModel=777&ViewReportF=View+Report. Retrieved November 3, 2011. 
  2. ^ a b c d "Boeing Commercial Airplanes prices". Boeing. http://www.boeing.com/commercial/prices/. Retrieved November 15, 2011. 
  3. ^ Robertson, David (March 13, 2009). "Workhorse jet has been huge success with airlines that want to cut costs". The Times (UK). http://business.timesonline.co.uk/tol/business/industry_sectors/transport/article5898240.ece. Retrieved March 20, 2009. 
  4. ^ Grantham, Russell (February 29, 2008). "Delta's new Boeing 777 can fly farther, carry more". The Atlanta Journal-Constitution. http://www.ajc.com/search/content/business/delta/stories/2008/02/28/delta_0229.html. Retrieved June 30, 2009. 
  5. ^ a b Norris & Wagner 1996, p. 89
  6. ^ a b c Glenday 2007, p. 200
  7. ^ a b c Phillips, Don (November 11, 2005). "New Boeing 777 breaks distance record". International Herald Tribune. http://www.highbeam.com/doc/1P1-115126417.html. Retrieved May 8, 2011. 
  8. ^ a b c d e f g h "World Airliner Census". Flight International, August 16–22, 2011.
  9. ^ Wells & Rodrigues 2004, p. 146
  10. ^ "The 1980s Generation". TIME. August 14, 1978. http://www.time.com/time/magazine/article/0,9171,946981,00.html. Retrieved July 19, 2008. 
  11. ^ a b Weiner, Eric (December 19, 1990). "New Boeing Airliner Shaped by the Airlines". The New York Times. http://www.nytimes.com/1990/12/19/business/new-boeing-airliner-shaped-by-the-airlines.html. Retrieved May 8, 2011. 
  12. ^ a b Eden 2008, pp. 99–104
  13. ^ a b c d e f Norris & Wagner 1999, p. 128
  14. ^ Yenne 2002, p. 33
  15. ^ a b c d Eden 2008, p. 112
  16. ^ a b c d Norris & Wagner 1999, p. 126
  17. ^ a b c d Norris & Wagner 1999, p. 127
  18. ^ a b Eden 2008, p. 106
  19. ^ Norris & Wagner 2001, p. 11
  20. ^ Norris & Wagner 1996, pp. 9–14
  21. ^ Norris & Wagner 1999, p. 129
  22. ^ a b Birtles 1998, pp. 13–16
  23. ^ Lane, Polly (December 1, 1991). "Aerospace Company May Be Rethinking Commitment To The Puget Sound Area". Seattle Times. http://community.seattletimes.nwsource.com/archive/?date=19911201&slug=1320330. Retrieved October 15, 2009. 
  24. ^ a b c d Norris & Wagner 1999, p. 132
  25. ^ "Business Notes: Aircraft". Time. October 29, 1990. http://www.time.com/time/magazine/article/0,9171,971474,00.html. Retrieved July 19, 2008. 
  26. ^ a b c Norris & Wagner 1996, p. 14
  27. ^ Norris & Wagner 1996, p. 13
  28. ^ Norris & Wagner 1996, p. 15
  29. ^ Norris & Wagner 1996, p. 20
  30. ^ "BA Gets New 777 Model". Seattle Post-Intelligencer. February 10, 1997. http://www.highbeam.com/doc/1G1-64618874.html. Retrieved May 8, 2011. 
  31. ^ a b Norris & Wagner 1999, p. 133
  32. ^ Norris & Wagner 1999, pp. 133–134
  33. ^ Abarbanel & McNeely 1996, p. 124 Note: IVT is still active at Boeing in 2010 with over 29,000 users.
  34. ^ Norris & Wagner 1996, p. 21
  35. ^ a b Eden 2008, p. 108
  36. ^ Hise, Phaedra (July 9, 2007). "The power behind Boeing's 787 Dreamliner". CNN. http://money.cnn.com/magazines/fsb/fsb_archive/2007/07/01/100123032/index.htm. Retrieved October 15, 2009. 
  37. ^ a b Richardson, Michael (February 23, 1994). "Demand for Airliners Is Expected to Soar: Asia's High-Flying Market". International Herald Tribune. http://spiderbites.nytimes.com/iht/1994/02/00000.html. Retrieved March 20, 2009. 
  38. ^ Sabbagh 1995, pp. 112–114
  39. ^ a b Norris & Wagner 1999, pp. 136–137
  40. ^ a b c d "A question of choice". Flight International. January 3, 2000. http://www.flightglobal.com/articles/2000/03/01/62872/a-question-of-choice.html. Retrieved March 29, 2009. 
  41. ^ Sabbagh 1995, pp. 168–169
  42. ^ Norris, Guy (March 31, 1993). "Boeing prepares for stretched 777 launch". Flight International. http://www.flightglobal.com/pdfarchive/view/1993/1993%20-%200691.html. Retrieved May 8, 2011. 
  43. ^ Norris & Wagner 1996, p. 7
  44. ^ Sabbagh 1995, pp. 256–259
  45. ^ a b c d e Eden 2008, p. 107
  46. ^ Birtles 1998, p. 25
  47. ^ Andersen, Lars (August 16, 1993). "Boeing's 777 Will Be Tops When It Comes To ETOPS". Seattle Times. http://community.seattletimes.nwsource.com/archive/?date=19930816&slug=1716209. Retrieved March 20, 2009. 
  48. ^ a b c Norris & Wagner 1999, p. 144
  49. ^ Birtles 1998, p. 40
  50. ^ Birtles 1998, p. 20
  51. ^ Birtles 1999, p. 34
  52. ^ Birtles 1998, p. 69
  53. ^ "First Boeing 777 delivery goes to United Airlines". Business Wire. May 15, 1995. http://www.highbeam.com/doc/1G1-16824929.html. Retrieved December 1, 2008. 
  54. ^ Norris & Wagner 1999, p. 139
  55. ^ Pandey, Mohan (2010). How Boeing Defied the Airbus Challenge. Createspace. p. 86. ISBN 9781450501132. http://www.amazon.com/How-Boeing-Defied-Airbus-Challenge/dp/1450501133/ref=tmm_pap_title_0. Retrieved 2011-07-01. 
  56. ^ 180-minute ETOPS approval was granted to the General Electric GE90 powered 777 on October 3, 1996, and to the Rolls-Royce Trent 800-powered 777 on October 10, 1996.
  57. ^ Birtles 1998, p. 80
  58. ^ a b Eden 2004, p. 115.
  59. ^ a b c Norris & Wagner 1999, p. 143
  60. ^ Norris & Wagner 1999, p. 147
  61. ^ Norris & Wagner 1999, pp. 146–147
  62. ^ "Boeing Roars Ahead". BusinessWeek. November 6, 2005. http://www.businessweek.com/magazine/content/05_45/b3958033.htm?campaign_id=tbw. Retrieved December 1, 2008. 
  63. ^ a b c Norris & Wagner 1999, p. 148
  64. ^ a b c d e Eden 2008, p. 113.
  65. ^ a b c d e f g h i j "The Boeing 777 Program Background". Boeing. http://www.boeing.com/commercial/777family/background.html. Retrieved June 6, 2009. 
  66. ^ a b Haenggi, Michael. "777 Triple Seven Revolution". Boeing Widebodies. St. Paul, Minnesota: MBI, 2003. ISBN 0-7603-0842-X.
  67. ^ a b c d Norris & Wagner 1999, p. 151
  68. ^ Norris & Wagner 2001, p. 125
  69. ^ a b Norris & Wagner 1999, pp. 151–157
  70. ^ a b c Norris & Wagner 1999, p. 165
  71. ^ a b c d Norris & Wagner 1999, pp. 165–167
  72. ^ a b Norris, Guy (May 15, 1996). "Boeing sets decision date for new versions of 777". Flight International. http://www.flightglobal.com/articles/1996/05/15/16991/boeing-sets-decision-date-for-new-versions-of-777.html. Retrieved March 29, 2009. 
  73. ^ "Aero-Engines – Rolls-Royce Trent". Jane's Transport Business News. February 13, 2001. Archived from the original on March 25, 2008. http://web.archive.org/web/20080325005849/http://www.janes.com/aerospace/civil/news/jae/jae010213_2_n.shtml. Retrieved March 21, 2009. 
  74. ^ General Electric Biggest Jet Engine for B-777. History.com. 2008. http://www.youtube.com/watch?v=Rac87fY6w-M&feature=related. 
  75. ^ "Boeing launches stretch 777 jetliner". Deseret News. February 29, 2000. http://www.deseretnews.com/article/746327/. Retrieved October 28, 2009. 
  76. ^ Song, Kyung (October 5, 2000). "Air France orders 10 777s". Seattle Times. http://community.seattletimes.nwsource.com/archive/?date=20001005&slug=TTKK1QJ4T. Retrieved September 15, 2009. 
  77. ^ Dinell, David (March 16, 2004). "Boeing's 777-300ER receives certification". Wichita Business Journal. http://www.bizjournals.com/wichita/stories/2004/03/15/daily17.html?jst=b_ln_hl. Retrieved March 20, 2009. 
  78. ^ a b Ostrower, Jon (August 7, 2008). "Green and versatile". Flight International. http://www.flightglobal.com/articles/2008/07/08/225112/green-and-versatile.html. Retrieved March 29, 2009. 
  79. ^ a b c d e f Thomas, Geoffrey (June 13, 2008). "Boeing under pressure as demand rises for fuel-saver 777". The Australian. http://www.theaustralian.com.au/business/aviation/demand-rises-for-fuel-saver-777/story-e6frg95x-1111116616439. Retrieved June 20, 2008. 
  80. ^ Wallace, James (February 3, 2006). "777 distance champ is certified for service". Seattle Post-Intelligencer. http://www.seattlepi.com/default/article/777-distance-champ-is-certified-for-service-1194755.php. Retrieved December 10, 2008. 
  81. ^ a b Chaudhry, Muhammad Bashir (November 18, 2008). "Modernization of PIA fleet". Pakistan Dawn. http://www.dawn.com/2002/11/18/ebr15.htm. Retrieved February 12, 2008. 
  82. ^ a b "Boeing 777-200LR and 777-300ER Technical Characteristics". Boeing. http://www.boeing.com/commercial/777family/pf/pf_300product.html. Retrieved March 20, 2009. 
  83. ^ Trimble, Stephen (May 23, 2008). "Boeing 777F makes its debut ahead of flight test phase". Flight International. http://www.flightglobal.com/articles/2008/05/23/224065/boeing-777f-makes-its-debut-ahead-of-flight-test-phase.html. Retrieved June 6, 2008. 
  84. ^ a b "Datafile: Boeing 777F". Flug Revue. 2006. Archived from the original on January 30, 2008. http://web.archive.org/web/20080130004241/http://www.flug-revue.rotor.com/FRtypen/FR777F.htm. Retrieved March 20, 2009. 
  85. ^ a b c d e f g h "Boeing 777 – Technical Information". Boeing. http://www.boeing.com/commercial/777family/specs.html. Retrieved October 9, 2011. 
  86. ^ Ionides, Nicholas (July 15, 2008). "Boeing 777F flies for the first time". Flight International. http://www.flightglobal.com/articles/2008/07/15/225443/picture-boeing-777f-flies-for-the-first-time.html. Retrieved March 20, 2009. 
  87. ^ "European Aviation Safety Agency Validates FAA Certification of Boeing 777 Freighter". Reuters. February 6, 2009. http://www.reuters.com/article/2009/02/06/idUS206466+06-Feb-2009+PRN20090206. Retrieved July 1, 2011. 
  88. ^ a b Ionides, Nicholas. "First 777 freighter delivered to Air France". Air Transport Intelligence via Flightglobal.com. http://www.flightglobal.com/articles/2009/02/20/322853/pictures-first-777-freighter-delivered-to-air-france.html. Retrieved February 20, 2009. 
  89. ^ "Boeing launches cargo version of 777". Associated Press. May 24, 2005. http://www.msnbc.msn.com/id/7962814/. Retrieved March 20, 2009. 
  90. ^ a b Song, Kyung (June 4, 2000). "Who builds a better widebody?". Seattle Times. http://community.seattletimes.nwsource.com/archive/?date=20000604&slug=4024775. Retrieved October 29, 2009. 
  91. ^ Ray, Susanna (April 21, 2009). "Boeing Earnings Buffeted by 777 Production Slump". Bloomberg. http://www.bloomberg.com/apps/news?pid=conewsstory&refer=conews&tkr=COL%3AUS&sid=abe2A4L8NeNA. Retrieved October 29, 2009. 
  92. ^ Gates, Dominic (November 16, 2004). "Freighter version of 777 jetliner in works". Seattle Times. http://community.seattletimes.nwsource.com/archive/?date=20041116&slug=boeing16. Retrieved October 29, 2009. 
  93. ^ a b c d e "Airbus A350 XWB puts pressure on Boeing 777". Flight International. November 26, 2007. http://www.flightglobal.com/articles/2007/11/26/219901/airbus-a350-xwb-puts-pressure-on-boeing-777.html. Retrieved December 1, 2008. 
  94. ^ Hepher, Tim (September 8, 2008). "Sizing up Boeing's plane portfolio". Reuters. http://www.reuters.com/article/2008/09/08/us-boeing-models-idUSL515490420080908. Retrieved June 3, 2011. 
  95. ^ a b c d "Order trickle continues for in-production widebodies". Flight International. September 8, 2008. http://www.flightglobal.com/articles/2010/11/02/349052/world-airliners-order-trickle-continues-for-in-production.html. Retrieved November 2, 2010. 
  96. ^ Ostrower, Jon (September 8, 2008). "Boeing looks to extend 777 wingspan for incremental improvement package". Flight International. http://www.flightglobal.com/articles/2010/03/17/339599/boeing-looks-to-extend-777-wingspan-for-incremental-improvement.html. Retrieved March 17, 2010. 
  97. ^ Ostrower, Jon (June 21, 2011). "PARIS: Boeing mulls 777-9X". Air Transport Intelligence via Flightglobal.com. http://www.flightglobal.com/articles/2011/06/21/358550/paris-boeing-mulls-777-9x.html. Retrieved July 4, 2011. 
  98. ^ "Emirates may be launch customer for new Boeing 777". Seattle Post-Intelligencer, September 12, 2011. Retrieved September 14, 2011.
  99. ^ Ostrower, Jon (September 14, 2011). "Next generation 777 comes into focus". Flight International. http://www.flightglobal.com/news/articles/next-generation-777-comes-into-focus-362065/. Retrieved November 12, 2011. 
  100. ^ Ostrower, Jon (September 14, 2011). "Boeing's 777-9X comes into focus with a massive CFRP wing". Flightblogger. http://www.flightglobal.com/blogs/flightblogger/2011/09/boeings-777-upgrades-come-into.html. Retrieved November 12, 2011. 
  101. ^ Tsang, Daniel (September 14, 2011). "New Boeing 777X likely to be a highly efficient derivative". Aspire Aviation. http://www.aspireaviation.com/2011/09/14/new-boeing-777x-likely-to-be-a-highly-efficient-derivative/. Retrieved November 12, 2011. 
  102. ^ Ranson, Lori (December 20, 2010). "Boeing unveils another increase in Boeing 777 production". Air Transport Intelligence via Flightglobal.com. http://www.flightglobal.com/articles/2010/12/20/351122/boeing-unveils-another-increase-in-boeing-777-production.html. Retrieved January 2, 2011. 
  103. ^ a b "Boeing Begins Work on 1,000th 777". Boeing. November 7, 2011. http://boeing.mediaroom.com/index.php?s=43&item=2012. Retrieved November 8, 2011. 
  104. ^ "Flight Standardization Board Report". Federal Aviation Administration. August 25, 2011. http://fsims.faa.gov/wdocs/fsb/b-787_fsb.pdf. Retrieved November 8, 2011. 
  105. ^ a b c d e f North, David. "Finding Common Ground in Envelope Protection Systems". Aviation Week & Space Technology, August 28, 2008, pp. 66–68.
  106. ^ Birtles 1998, p. 57
  107. ^ Norris & Wagner 1996, p. 47
  108. ^ a b Sweetman, Bill (September 1, 2005). "The Short, Happy Life of the Prop-fan". Air & Space. http://www.airspacemag.com/history-of-flight/prop-fan.html?c=y&page=5. Retrieved December 1, 2008. 
  109. ^ Corliss, Bryan (November 5, 2003). "New Boeing 777 Boasts Breakthrough Video System". Forbes. http://www.forbes.com/2003/11/05/1105boeingpinnacor.html. Retrieved May 5, 2009. 
  110. ^ Ropelewski, Robert (June 1995). "Flying the Boeing 777". Interavia Business & Technology. http://findarticles.com/p/articles/mi_hb3126/is_n591_v50/ai_n28658541/. Retrieved March 21, 2009. 
  111. ^ Norris & Wagner 1999, p. 130
  112. ^ "Type Acceptance Report – Boeing 777". Civil Aviation Authority of New Zealand. https://www.caa.govt.nz/aircraft/Type_Acceptance_Reps/Boeing_777.pdf. Retrieved December 1, 2008. 
  113. ^ Norris & Wagner 1996, p. 35
  114. ^ Norris & Wagner 1996, p. 92
  115. ^ Eden 2008, p. 111
  116. ^ Turner, Aimee (March 28, 2006). "ADP to revamp runway at Orly". Flight International. http://www.flightglobal.com/articles/2006/03/28/205694/adp-to-revamp-runway-at-orly.html. Retrieved April 2, 2009. 
  117. ^ Birtles 1998, p. 66
  118. ^ Birtles 1998, p. 60
  119. ^ a b Norris & Wagner 2001, pp. 32–33
  120. ^ Wallace, James (November 26, 2008). "Continental plans Dreamliner seats to be roomy, with a view". Seattle Post-Intelligencer. http://www.highbeam.com/doc/1G1-190312953.html. Retrieved July 1, 2011. 
  121. ^ "Lufthansa Technik turns out first customized VIP Boeing 777". Lufthansa Technik. December 22, 2000. Archived from the original on 20090615231836. http://web.archive.org/web/20090615231836/http://www.lufthansa-technik.com/applications/portal/lhtportal/lhtportal.portal?_nfpb=true&_pageLabel=Template7_8&requestednode=421&webcacheURL=TV_I/Media-Relations/Media-Archive/Archive-Press-Releases/Previous-Press-Releases/Press-Releases-2000/First_VIP_B777.xml. Retrieved October 25, 2008. 
  122. ^ Boeing 777 Fun Facts. airliners.net
  123. ^ a b Wallace, James (February 4, 2003). "Boeing adds places for crews to snooze". Seattle Post-Intelligencer. http://www.seattlepi.com/default/article/Aerospace-Notebook-Boeing-adds-places-for-crews-1106748.php. Retrieved June 3, 2011. 
  124. ^ Norris & Wagner 1999, p. 122
  125. ^ Norris & Wagner 1999, pp. 46, 112
  126. ^ Kirby, Mark (7 July 2011). "Boeing eyes 'common cabin experience' across platforms". Flightglobal. Air Transport Intelligence via Flightglobal.com. http://www.flightglobal.com/articles/2011/07/07/359264/boeing-eyes-common-cabin-experience-across-platforms.html. Retrieved 8 July 2011. 
  127. ^ a b c "ICAO Document 8643". International Civil Aviation Organization. http://legacy.icao.int/anb/ais/8643/. Retrieved March 30, 2009. 
  128. ^ a b Birtles 1999, pp. 103, 105
  129. ^ Norris & Wagner 2001, p. 102
  130. ^ "About our operating aircraft". Japan Airlines. http://www.jal.co.jp/en/5971/readme/ships_info.html. Retrieved October 25, 2009. 
  131. ^ John, Danny (September 12, 2007). "Air NZ must ask shareholders". Sydney Morning Herald. http://www.smh.com.au/news/business/air-nz-must-ask-shareholders/2007/09/11/1189276720074.html. Retrieved March 30, 2009. 
  132. ^ "Cathay Pacific puts its trust in Boeing". Asia Times Online. December 3, 2005. http://www.atimes.com/atimes/China_Business/GL03Cb06.html. Retrieved March 30, 2009. 
  133. ^ "Air Canada – 777-300ER (77W)". Air Canada. http://www.aircanada.com/en/about/fleet/77W.html. Retrieved March 30, 2009. 
  134. ^ a b c "777-200/-200ER Technical Characteristics". Boeing. November 21, 2008. http://www.boeing.com/commercial/777family/pf/pf_200product.html. Retrieved June 6, 2009. 
  135. ^ Wallace, James (November 19, 2001). "Aerospace Notebook: Conner's best bet – Let it ride on the 777s but airlines aren't ready to commit to 200LR model". Seattle Post-Intelligencer. http://www.highbeam.com/doc/1G1-80189598.html. Retrieved May 8, 2011. 
  136. ^ Eden 2008, pp. 112–113
  137. ^ "Still Tops for ETOPS". Air Safety Week. April 14, 2003. http://www.aviationtoday.com/asw/categories/commercial/Still-Tops-for-ETOPS_2351.html. Retrieved May 23, 2009. 
  138. ^ "Divert Details". Air Safety Week. March 24, 2003. http://www.aviationtoday.com/asw/categories/bga/Divert-Details_2255.html. Retrieved May 23, 2009. 
  139. ^ Wall, Robert (October 30, 2005). "Boeing's Interest Focuses on 747 Advanced, Not 787-10". Aviation Week & Space Technology. http://www.aviationweek.com/aw/generic/story_generic.jsp?channel=awst&id=news/10315p03.xml. Retrieved March 20, 2009. 
  140. ^ Norris & Wagner 1999, pp. 151–152
  141. ^ Birtles 1998, p. 67
  142. ^ Norris & Wagner 1999, pp. 152–156
  143. ^ "777-300 Technical Characteristics". Boeing. http://www.boeing.com/commercial/777family/pf/pf_300product.html. Retrieved March 20, 2009. 
  144. ^ a b "Datafile: Boeing 777–300". Flug Revue. 2006. Archived from the original on January 30, 2008. http://web.archive.org/web/20080130005719/http://www.flug-revue.rotor.com/FRtypen/FR777300.htm. Retrieved March 20, 2009. 
  145. ^ a b c "Datafile: Boeing 777-300ER". Flug Revue. 2006. Archived from the original on January 29, 2008. http://web.archive.org/web/20080129232450/http://www.flug-revue.rotor.com/FRtypen/FR77730e.htm. Retrieved March 20, 2009. 
  146. ^ a b c d e "Datafile: Boeing 777-200LR Worldiner". Flug Revue. 2006. Archived from the original on June 23, 2008. http://web.archive.org/web/20080517015012/www.flug-revue.rotor.com/FRtypen/FR77720L.htm. Retrieved March 20, 2009. 
  147. ^ Field, David (March 17, 2008). "Delta pushes Boeing to squeeze more range from 777-200LR". Flight International. http://www.flightglobal.com/articles/2008/03/17/222225/delta-pushes-boeing-to-squeeze-more-range-from-777-200lr.html. Retrieved December 2, 2008. 
  148. ^ "Flight of Boeing’s 777 Breaks Distance Record". The New York Times. November 10, 2005. http://www.nytimes.com/2005/11/10/business/11air.html. Retrieved December 10, 2008. 
  149. ^ "FAA Type Certificate Data Sheet T00001SE". Federal Aviation Administration. http://www.airweb.faa.gov/Regulatory_and_Guidance_Library/rgMakeModel.nsf/0/6f3c0a764bd5cd0d86257482006e966a/$FILE/T00001SE.pdf. Retrieved November 5, 2009. 
  150. ^ "Deliveries". Boeing. http://active.boeing.com/commercial/orders/index.cfm?content=modelselection.cfm&pageid=m15525. Retrieved September 8, 2009. 
  151. ^ a b Eisenstein, Paul (July 2004). "Biggest Jet Engine". Popular Mechanics. http://www.popularmechanics.com/technology/engineering/1280866. Retrieved June 3, 2011. 
  152. ^ Norris, Guy (January 2003). "Long Ranger". Flight International. http://www.flightglobal.com/pdfarchive/view/2003/2003%20-%200157.html. Retrieved December 2, 2008. 
  153. ^ Cheung, Clare; Irene Shen (November 8, 2007). "Cathay Pacific Orders 17 Boeing Jets". Bloomberg. http://www.bloomberg.com/apps/news?pid=20601089&sid=afRkGr.NJawQ&refer=china. Retrieved December 2, 2008. 
  154. ^ Thomas, Geoffrey. "Boeing nose ahead in Qantas order race". The Australian, December 2, 2005. Retrieved: March 20, 2009.
  155. ^ "Air France takes delivery of Boeing 777-300ER". Logistics Business Review. May 5, 2008. http://www.logistics-business-review.com/news/air_france_takes_delivery_of_boeing_777300er. Retrieved October 20, 2008. 
  156. ^ Kingsley Jones, Ben; Guy Norris (November 29, 2005). "Enhanced A340 to take on 777". Flight International. http://www.flightglobal.com/articles/2005/11/29/203391/exclusive-enhanced-a340-to-take-on-777.html. Retrieved April 2, 2009. 
  157. ^ Norris, Guy (May 16, 2006). "Cargo Kings: new Boeing 777F and 747-8F programmes". Flight International. http://www.flightglobal.com/articles/2006/05/16/206571/cargo-kings-new-boeing-777f-and-747-8f-programmes.html. Retrieved March 29, 2009. 
  158. ^ Wallace, James (November 15, 2004). "Boeing seeks cargo 777 orders". Seattle Post-Intelligencer. http://www.seattlepi.com/default/article/Boeing-seeks-cargo-777-orders-1159604.php. Retrieved December 3, 2008. 
  159. ^ "Air France to buy Boeing 777 freighters". USA Today. Associated Press. March 25, 2005. http://www.usatoday.com/money/industries/manufacturing/2005-03-25-boeing-air-france_x.htm. Retrieved October 19, 2010. 
  160. ^ Sobie, Brendan (September 23, 2008). "Boeing reveals cargo conversion development studies for 777". Air Transport Intelligence via Flightglobal.com. http://www.flightglobal.com/articles/2008/09/23/316341/boeing-reveals-cargo-conversion-development-studies-for.html. Retrieved October 19, 2010. 
  161. ^ Sobie, Brendan (October 19, 2010). "Boeing expects to secure 777BCF launch customer in early 2011". Air Transport Intelligence via Flightglobal.com. http://www.flightglobal.com/articles/2010/10/19/348642/boeing-expects-to-secure-777bcf-launch-customer-in-early.html. Retrieved October 19, 2010. 
  162. ^ Sachdev, Ameet (September 27, 2006). "Boeing adds 777 to tanker mix". Chicago Tribune. http://articles.chicagotribune.com/2006-09-27/business/0609270250_1_northrop-eads-tanker-contract-president-of-tanker-programs. Retrieved May 8, 2011. 
  163. ^ Norris, Guy (October 3, 2006). "US Air Force tanker RFP reveals KC-777 offer". Flight International. http://www.flightglobal.com/articles/2006/10/03/209627/us-air-force-tanker-rfp-reveals-kc-777-offer.html. Retrieved April 21, 2009. 
  164. ^ "Ready to fill 'er up". Boeing. November 2006. http://www.boeing.com/news/frontiers/archive/2006/november/cover.pdf. Retrieved April 21, 2009. 
  165. ^ Vandruff, Ken (April 11, 2007). "Boeing submits KC-767 tanker proposal". Wichita Business Journal. http://www.bizjournals.com/wichita/stories/2007/04/09/daily22.html. Retrieved March 20, 2009. 
  166. ^ "Boeing Company Current Deliveries". Boeing. October 2011. http://active.boeing.com/commercial/orders/index.cfm?content=displaystandardreport.cfm&RequestTimeout=20000&optReportType=CurYrDelv&pageid=m15520. Retrieved November 3, 2011. 
  167. ^ "Orders and Deliveries search page". Boeing. http://active.boeing.com/commercial/orders/index.cfm?content=userdefinedselection.cfm&pageid=m15527. Retrieved November 3, 2011. 
  168. ^ a b c "Safety Recommendation: In reply refer to: A-09-17 (Urgent) and −18". Mayday, Discovery Channel. March 11, 2009. http://www.youtube.com/watch?v=EIMXfl8BIMA&feature=related. 
  169. ^ "Boeing 777 occurrences". Aviation Safety Network. December 12, 2011. http://aviation-safety.net/database/dblist.php?Type=107. Retrieved December 16, 2011. 
  170. ^ "Boeing 777 hull losses". Aviation Safety Network. December 12, 2011. http://aviation-safety.net/database/dblist.php?field=typecode&var=107%&cat=%1&sorteer=datekey&page=1. Retrieved December 16, 2011. 
  171. ^ "Boeing 777 Accident Statistics". Aviation Safety Network. December 12, 2011. http://aviation-safety.net/database/type/type-stat.php?type=107. Retrieved December 16, 2011. 
  172. ^ a b "British Airways Flight 2019 ground fire". Aviation Safety Network. http://aviation-safety.net/database/record.php?id=20010905-1. Retrieved November 21, 2008. 
  173. ^ "DEN01FA157 entry". National Transportation Safety Board. February 24, 2005. http://www.ntsb.gov/aviationquery/brief.aspx?ev_id=20010918X01956&key=1. Retrieved January 2, 2011. 
  174. ^ "Interim Management Statement". British Airways. February 1, 2008. http://www.investegate.co.uk/Article.aspx?id=200802010700330296N. Retrieved November 21, 2008. 
  175. ^ "Report on the accident to Boeing 777-236ER, G-YMMM, at London Heathrow Airport on 17 January 2008". AAIB. February 9, 2010. http://www.aaib.gov.uk/cms_resources.cfm?file=/1-2010%20G-YMMM.pdf. Retrieved February 9, 2010. 
  176. ^ "'High risk' of plane fault repeat". BBC News. March 13, 2009. http://news.bbc.co.uk/2/hi/uk_news/7941137.stm. Retrieved March 20, 2009. 
  177. ^ Woodman, Peter (Febraury 9, 2010). "Ice 'probable cause' of Heathrow crash-landing". The Independent. http://www.independent.co.uk/news/uk/home-news/ice-probable-cause-of-heathrow-crashlanding-1893650.html. Retrieved December 11, 2011. 
  178. ^ Kaminski-Morrow, David (February 29, 2008). "American investigates as 777 engine fails to respond to throttle". Flight International. http://www.flightglobal.com/articles/2008/02/29/221923/american-investigates-as-777-engine-fails-to-respond-to-throttle.html. Retrieved March 20, 2009. 
  179. ^ "NTSB Investigates B777 Uncommanded Engine Rollback". Air Safety Week. December 22, 2008. http://www.aero-news.net/index.cfm?ContentBlockID=7cba7571-d0e2-4736-a08b-2c24fcd7f225&C...11a6bd089ea. Retrieved April 2, 2009. 
  180. ^ a b c d "EgyptAir Flight 667 ground fire". Aviation Safety Network. http://aviation-safety.net/database/record.php?id=20110729-0. Retrieved January 2, 2012. 
  181. ^ a b "Recent Incidents / Accidents Worldwide". Jet Airliner Crash Data Evaluation Centre. July 2011. http://www.jacdec.de/news/months/11_07.htm. Retrieved January 2, 2012. 
  182. ^ "777 Airplane Characteristics for Airport Planning". Boeing. May 2011. http://www.boeing.com/commercial/airports/777.htm. Retrieved October 9, 2011. 
  183. ^ Frawley 2003, pp. 61–62
  184. ^ "Trent 800 Technical data (archive)". Rolls-Royce. 2007. Archived from the original on October 26, 2007. http://web.archive.org/web/20071026200936/http://www.rolls-royce.com/civil_aerospace/products/airlines/trent800/technical.jsp. Retrieved May 23, 2009. 
Bibliography
  • Abarbanel, Robert; William McNeely (1996). FlyThru the Boeing 777. New York: ACM SIGGRAPH. ISBN 0-89791-784-7. 
  • Birtles, Philip (1998). Boeing 777, Jetliner for a New Century. St. Paul, Minnesota: Motorbooks International. ISBN 0-7603-0581-1. 
  • Birtles, Philip (1999). Modern Civil Aircraft: 6, Boeing 757/767/777, third edition. London: Ian Allen Publishing. ISBN 0-7110-2665-3. 
  • Eden, Paul, ed (2008). Civil Aircraft Today: The World's Most Successful Commercial Aircraft. London: Amber Books Ltd. ISBN 1-84509-324-0. 
  • Frawley, Gerard (2003). The International Directory of Civil Aircraft 2003/2004. London: Aerospace Publications. ISBN 1-875671-58-7. 
  • Glenday, Craig (2007). Guinness World Records. London/New York: HiT Entertainment. ISBN 978-0-9735514-4-0. 
  • Norris, Guy; Mark Wagner (1996). Boeing 777. St. Paul, Minnesota: Motorbooks International. ISBN 0-7603-0091-7. 
  • Norris, Guy; Mark Wagner (2001). Boeing 777: The Technological Marvel. Minneapolis, Minnesota: Zenith Imprint. ISBN 0-7603-0890-X. 
  • Norris, Guy; Mark Wagner (1999). Modern Boeing Jetliners. Minneapolis, Minnesota: Zenith Imprint. ISBN 0-7603-0717-2. 
  • Sabbagh, Karl (1995). 21st Century Jet: The Making of the Boeing 777. New York: Scribner. ISBN 0-333-59803-2. 
  • Wells, Alexander T.; Clarence C. Rodrigues (2004). Commercial Aviation Safety. New York: McGraw-Hill Professional. ISBN July 0 141742-7. 
  • Yenne, Bill (2002). Inside Boeing: Building the 777. Minneapolis, Minnesota: Zenith Press. ISBN 0-7603-1251-6. 

External links

External images
Boeing 777-200 cutaway
Boeing 777-200 cutaway from Flightglobal.com